Tag: traffic management

Introducing the all New CityWall

Posted on

Categories Barriers, Customisation, Manufacturing, New ProductsTags , , , , , , , , , , , ,

CityWall Red White Barrier with DoubleTop Products
Introducing the all New CityWall
A first from Melba Swintex and a first for the Traffic Management sector, the CityWall is a 2 metre Water filled separator with one key feature – an innovational twin-colour option never seen before in the industry, providing the ultimate brand identity on worksites and the like.

White Red CityWall Separator
STRUCTURE

At 2m in length and 0.8m in height, the CityWall is suited to heavy-duty, long-term projects. With high-impact, ultraviolet, and all-weather resistance, the CityWall is capable to withstand the test of time.

Inside of CityWall showing water
JUST ADD WATER

Highly detailed strengthening features allow the blow-moulded body to withstand great pressures. This detail allows for the capacity of up to 250 litres, resulting in at least an additional 250 kg of weight.

Filling Cap on the Base of the CityWall
FILLING

A heavy-duty cap found on either side of the body allows entry for a standard bowser nozzle allowing for a quick and easy fill.

Closeup of Embossing on the CityWall Base
EMBOSSING

Featuring our largest embossing area to date, either side can be branded with corporate logos and any additional detail required.

Bolt that connect top to bottom of the CityWall
FIXING

7 points of connection using highly robust steel bolts guarantee strength and longevity of the CityWall.

Run of CityWalls in White and Blue

DoubleTop and Mini-Doubletop stacked

COMPATIBILITY


If 0.8m in height isn’t enough, then the CityWall can be extended to 1.35 m and 1.8 m respectively via the addition of both the DoubleTop and Mini DoubleTop from Melba Swintex. Hole centres seen throughout the entire Separator range ensure compatibility amongst existing products. These two products also allow further customisation emphasizing brand identity throughout.

Run of CityWalls in Green and White with Green DoubleTop

NEW Driveway Board

Posted on

Categories Customisation, Manufacturing, New Products, Standards, Testing, Trench Cover, UtilitiesTags , , , , , , , , , , , ,

Driveway Board
ALL NEW Driveway Board from Melba Swintex

The Driveway Board is the first blow moulded board of its type. Tested under strict laboratory conditions, the board has been approved to the current HAUC specification. As well as it’s great strength and durability, the board is also 100% recyclable.

Driveway Board Underneath

Sophisticated design on the underside of the board, complete with high-strength bars supply additional strength resulting in the board capable of supporting heavy loads. With the addition of a deavy-duty PVC skirt that adds unparalleled grip to prevent movement of the board.

Driveway Board Exploded View

All materials used on the driveway board are 100% recyclable. By using Melba Swintex closed-loop recycling this eliminates sending the boards to landfill, each Driveway Board when recycled, can be used to manufacture new products, cone bases, or even a new skirt for another Driveway Board.

Driveway Board in Situ

Driveway Board Tread Pattern

With safety at the forefront, careful research & design has been focused on the top surface pattern to ensure the best distribution of detail to allow a good grip for both footwear and tyres. Directional arrows have also been implemented to communicate the correct orientation of the board.

Driveway Board Testing

Tested in accordance with the latest HAUC regulations, the Driveway Board can withstand a full working load of 875 kgs with minimal deflection, & up to 1750 kgs with no sign of failure, over a trench span of 700mm.

Driveway Board

  • HAUC Compliant
  • Supports a 4 tonne vehicle
  • PVC Skirt for increased grip
  • Anti-Slip pattern & Anti-Trip edges
  • Directional arrows for ease of installation
  • 4 fixing holes
  • Corporate logos can be embossed*
  • Manufactured in yellow for high visibility, Corporate colours are also available *
  • 100% Recyclable
  • Built in handles for easy lifting
  • Manufactured in High Density Polyethylene & recycled PVC

Driveway Board and Tuff Tread

Lead Times for the Original Chapter 8 Barrier

Posted on

Categories Barriers, Customisation, ManufacturingTags , , , , , , , , , , , , , , , ,

Gate Barrier
MINIMAL LEAD TIMES – GET THEM HERE FIRST

The Gate Barrier is one of the original Chapter 8 barriers on the market, and our most popular barrier ever. These past few months we have invested heavily in new tooling which has seen lead times for the Gate massively reduced.

So get your orders in ready for all of those upcoming events we can all once again enjoy!

Gate Connection
Connection from barrier to barrier is quick and simple with an easy drop and secure solution, that allows for uneven ground and varying kerb heights.

Gate Courtesy Sign
Four Location lugs within the windows of the barrier allow for the attachment of a courtesy sign, providing the option for extra information if required.

Gate Embossing
Various customisation options are available for the barriers, including bespoke colours and corporate identification embossed onto the front of the barrier.

Gate Ballast Options

Like with all Melba Swintex barriers, there is an abundance of heavy-duty foot options as well as methods for ballasting for those high wind speed applications.



For more information on Wind Speed Classes, and how we successfully tested the Gate Barrier at the only full-scale wind tunnel within the UK, click here.

Gate In Situ

All New Mini-DoubleTop Barrier

Posted on

Categories Barriers, Business, Events, International, Manufacturing, New ProductsTags , , , , , , , , , , , , ,

The Mini-DoubleTop

After the addition of the HOG600 to the Melba Swintex Separator range, the number one request that customer presented us with was an alternative to the short metal-framed panels that increased the overall height of the separator system. We listened.

The Mini-DoubleTop is a smaller variation of the DoubleTop, designed to locate into various barrier systems in order to increase their height. The robust design with additional reflective panels makes the HOG600 Chapter 8 compliant, whilst also providing a sound and stable setup ensuring public and workforce safety.
Height Variations
Like the existing DoubleTop, the Mini-DT incorporates a Hook & Eye connection which allows a fast & effective installation without the need for any additional parts or tools. With extra length on the connecting peg to ensure connection on uneven grounds.

Mini-DoubleTop Variations

The New Environmentally Friendly Tuff Tread.

Posted on

Categories Business, Customisation, International, Manufacturing, New Products, Standards, Testing, Trench CoverTags , , , , , , , , , , , , , , , , , , ,

The Tuff Tread

1200 x 800 Tuff Tread

Introducing the all new environmentally friendly Tuff Tread. A completely recyclable trench cover that conforms to the latest HAUC regulations. Manufactured from HDPE with a PVC skirting, this single-man lift cover is perfect for use as a Footway Board in utility & general street works.

For more information including test reports and datasheets:
Click here for the Tuff Tread web page.
Tuff Tread Testing

Tested in accordance to the latest HAUC regulations under the full guidance of Lloyds British, an accredited testing house with over 200 years experience in this field. The Tuff Tread can withstand a full working load of 400 kgs with minimal deflection, & 800 kgs with no sign of failure, over a trench span of 700mm. See the video above to find out more.
Tuff Tread Construction

The materials used in the manufacturing of the Tuff Tread are 100% recyclable which dramatically reduces the products ending up in landfill by using our closed loop recycling opportunity. Each Tuff Tread when recycled, can be used to manufacture: new products, cone bases, or even a new skirt for another Tuff Tread.
GRP is a Hazardous Material

Current covers are manufactured from GRP, which is composed of fine strands of glass fibre that are a severe irritant for skin. When the material breaks, there is a potential risk the glass fibres can become airborne, which poses a serious risk to existing respiratory problems.
GRP to Landfill

Existing GRP Trench Covers can break and fracture easily, so therefore must be replaced regularly. It is extremely difficult to recycle GRP, and due to this, most GRP products end up in landfill at their end of life.
Manufactured from Durable Materials

The Tuff Tread uses materials that have a high strength-to-density ratio. They are proven to last longer than GRP products. The material does not splinter, nor pose an irritant threat when exposed to contact with the skin. Maintenance of them is easy, and they can be wiped or washed clean if and when required.
Closed Loop Recycling Opportunity
Closed Loop Recycling

Melba Swintex has a 100% commitment to the environment and due to this, offers a closed loop recycling opportunity on the new Tuff Tread and all of our existing products. For more details on this, and how you can improve your carbon footprint, get in touch using the link below:

Reducing landfill one product at a time.


Get in touch.

Our Barriers, Your Colours.

Posted on

Categories Barriers, Crowd Control Barrier, Customisation, ToolsTags , , , , , , , , ,

We have come a long way since the Henry Ford quoted “You can have any colour, as long as it is black”. When it comes to the personalisation of our barriers, the phrase could not be any more wrong.

The Product.

Melba Swintex are able to manufacture our barriers to your Pantone specification, with the option to have a set of coloured barrier feet, and to emboss your company logo to compliment your barrier choice.

The Tool.

Using our colour tool online, you can now get a sneak preview of how our barriers would look in your colours. Head over to the page now to have a play, and get a feel for the many variations we can offer.

The Benefit.

You are able to preview how a barrier would look before placing an order. Get in touch with your Melba Swintex Distributor to discuss the options available.



*With a minimum run of 120 Units for a bespoke colour, this is currently the shortest run for coloured barrier within the UK. Embossing plate at an additional cost.

Click Here to go to the Tool.

Melba Swintex specialise in the manufacturing of Temporary Traffic Management Systems within the plastics industry. We have a wealth of experience in design and manufacture, and work alongside our customers to provide customised products for industry.

Did you Know?

Posted on

Categories ManufacturingTags , , ,

In 2014 Melba Swintex manufactured just over a whopping 1,190,000 Trafffic Cones! The most ever made, resulting in 2014 being a record year.With the arrival of our new state of the art Blow Moulding machine, new product launches & expanding into new areas, 2015 is going to be even more successful.

Watch this space!

Bigfoot

The Bigfoot Cone is long established as the industry leader for Traffic Cones. It was the first two piece cone to be manufactured, and is the benchmark for Traffic Cones all over the world. The cone base is manufactured from recycled material, and can be coloured on request.

MPL

The MPL is a cost effective one piece cone, manufactured from 100% recycled thermoplastic, which is recyclable, making the MPL range a completely environmentally friendly cone family. The base can be coloured to suit, and/or embossed with a company logo.

No Waiting

There are a variety of No Waiting Cones available from Melba Swintex. Each one perfect to implement no parking restrictions. Head on over to our website to view the range that’s available.

View our Cone Range Online Here.

Melba Swintex specialise in the manufacturing of Temporary Traffic Management Systems within the plastics industry. We have a wealth of experience in design and manufacture, and work alongside our customers to provide customised products for industry.

Tuff Trench

Posted on

Categories New Products, Trench CoverTags , , , , ,

the 1200×800 Tuff Trench

Introducing the new Tuff Trench from Melba Swintex. The Tuff Trench is the first ever blow moulded Trench Cover, resulting in amazing strength, and the ability to withstand high impacts without any sign of integrity failure.  
  • 4 fixing holes. Can be bolted to the ground.
  • Can be fitted with reflective bands.
  • Anti-Slip pattern.
  • Designed with Anti-Trip edges.
  • Able to withstand over 400Kgs.
  • Handles for easy lifting.
  • Single man lift.
  • Corporate logos can be embossed onto the top of Tuff Trench cover
  • Manufactured in High Density Polyethylene.
  • Manufactured in yellow for high visibility, but can be coloured to suit (Minimum sized order).
  • Tuff Trench is 100% Recyclable
  • High impact resistance (Does not shatter).

What it Does.

The Tuff Trench covers excavations of up to 700mm in width, providing a safe pathway for the general public.

Ease of Use.

Handles have been incorporated into the design, resulting in an easy-to-carry product. The cover is a single man lift due to it’s low-in-weight design.

Fixing.

Four bolt holes are situated in each corner so that the cover can be securely fastened to the pathway with the bolts supplied. The board also incorporates the possibility of using bitumen padding.

The cover can withstand over 400kg loads, and has a high impact resistance. Strong, durable and able to protect open areas on a footpath. Manufactured from 100% virgin material and 100% recyclable.

Melba Swintex specialise in the manufacturing of Temporary Traffic Management Systems within the plastics industry. We have a wealth of experience in design and manufacture, and work alongside our customers to provide customised products for industry.